In response to a question from the CADWorx Plant Professional 2014 preview Webinar, please find the below demo of CADWorx Plant Professional 2014 with Ductile Iron Piping.  The short video shows the pipe auto-routing function in action with the DIP150 out-of-the-box Ductile Iron CADWorx Specification.

[jwplayer config=”cadworx-noplay” mediaid=”2200″]

NOTE: Please view in full screen mode using the button on the bottom-right in the viewer.

This post is legacy. I have expanded on this – you can read the most recent post here

Over time we receive a lot of hardware recommendation requests.  Currently, ECE Design recommends the following performance configuration:

• Windows 7 64 bit OS
• Processor: i7 Intel Processor- (any i7 processor will give good performance, let your budget be your guide)
• Hard Drive: Solid State Hard Drive for OS and Programs, (may be cost prohibitive)…OR…Raid configured hard drives, Raid 0 if drives are well backed up or set to Raid 5 if not.
• Video: NVidia with at least 1GB of Memory
• Minimum 12 GB RAM (more is better- buy as much as budget will allow)
• 26″ or larger monitor with 2nd monitor for other apps

 

That said, we still run CADWorx on Lenovo Thinkpad T400 units and some older Dell Latitudes without issue…

Let me know if you have any questions…